Deck Repair

How to Build Your Own Wood Deck

»Posted by on Oct 21, 2019 in Deck Repair | 0 comments

After completing your deck design and gathering the required supplies and apparatus, the first that you need to do is to prepare the site. This method is very important if you will be building your deck over a place which is presently covered with grass. By the time you get to know the size of the rectangle you like which the finished deck will consume, quantify out that area and make markings on the ground in order to specify where your deck will occupy.  

To ensure that the rectangle is true, you should measure crossways from one corner to corner, and in both ways. In addition to that, you should also measure the upper right to the lower left and upper left to the lower right. These measurements must be equal with each other. Then, remove any weeds or grass from the measured site with the use of the shovel in order to shape your working area. After that, prior to closing off the working site with decking, put some mulch over that space to inhibit the growth of unnecessary weeds and grasses. 

Materials for Wood Decking 

Some of these supplies from the hardware outlet which you will basically need to construct a deck are more likely to involve the following materials such as rebar, cardboard tube concrete forms, joist hangers, seismic ties, post bases, post caps, cinder blocks, gravel or crushed stone, pre-mixed concrete, caulking compound and flashing. If you like to use nails, you may actually use the stainless-steel nails. As a matter of fact, this can be either spiral-groove or ring-shank nails, for a better holding power. However, it would be much better to use the decking screws. With that being said, some of the other equipment one may need for your decking project are scrap lumber for bracing, safety eyewear, tape measure, circular saw, hammer, wrench (for the tightening of the lag screws, drill, caulking gun, wheelbarrow (for mixing concrete), plumb bob, carpenter’s square, carpenter’s level, as well as shovel. 

Last Step 

The last major method is basically wounding the deck boards and screwing them to the topmost portion of the joists. Aside from that, you must totter your deck so the seams do not all line up. Your deck won’t only be structurally steadier but will also look a lot more superior. If your decking will be a bit elevated off the ground, the codes of the building will dictate adding one railing. An accepted alternative to a wood deck is the composite deck. But amalgamated materials still are not as strong and durable as the good old wood itself, therefore, a composite deck should be supported by a wooden element. 

Also, decks can be made to look a bit more interesting with exotic kinds of plants and unique planters. The decks can have trellises and climbers as well. Furthermore, a deck may look more attractive and interesting when some kind of skirting is applied on the deck. To know more information deck building or repair, consider contacting a professional such as deck restore and repair Charlotte service provider. 

read more